Garmin 305 Tips - Article Updated and Group Created
50 watchers
May 2011
5:30pm, 3 May 2011
890 posts
|
zehnderboy
Thanks, that's what I thought I'll have to live with it and run next to someone else with a Garmin to find out when each mile has clicked over |
May 2011
1:09pm, 5 May 2011
13,071 posts
|
flanker
if it's stopped beeping the next stage is it stops working! I'd phone Garmin support as this is a recognised issue. I got mine swapped out f.o.c. on the basis that it was a known fault and hence not fit for purpose. had a bit of a battle but they gave in in the end |
May 2011
1:12pm, 5 May 2011
2,939 posts
|
WolfDancer
Auto lap is the beep, alerts is the other noise. Took me a while to figure out why mine did both, but found it and switched of the alerts.
|
May 2011
1:18pm, 5 May 2011
2,096 posts
|
Nywanda
anyone had any luck getting a new strap out of Garmin? Theyre on ebay/amazon for about £15 which isnt that much, however, Ive only had my 305 just under 18 months. Nae too happy that its bust (the rubber has complete parted along the seam where the fastner attaches. Not even fudgable-fixable)
|
May 2011
1:31pm, 5 May 2011
13,075 posts
|
flanker
got a freebie replacement one for my 310 when the buckle ripped out after about 2 years.
|
May 2011
1:43pm, 5 May 2011
2,420 posts
|
scottynbn
Ta for advice on the beeps vs ding-a-lings Autolap on and distance alerts on but the latter are set to repeat now, so one tone is consistent.
|
May 2011
2:16pm, 5 May 2011
914 posts
|
zehnderboy
Thanks Flanker, I'll try support - as you say it appears that the product isn't fit for purpose, if it allows sweat in, unless ofcourse you're not supposed to sweat whilst running
|
May 2011
3:16pm, 5 May 2011
13,077 posts
|
flanker
phone them. their phone support is good. their e-mail support is useless.
|
Jun 2011
10:03am, 6 Jun 2011
3,692 posts
|
Spally
Any suggestions. Just plugged my Garmin into the work computer and am just getting a blank screen - no Garmin charging written on front. Haven't tried it on home laptop yet though
|
Jun 2011
11:53am, 6 Jun 2011
2,420 posts
|
paul the builder
I've been seeing this increasingly lately - or the other annoying alternative, of the Garmin switching on when I put it on the cradle. I'm not totally sure if this is the problem, but it does seem to behave better if I clean up the contacts on the back of the watch before setting it on the cradle.
|
Related Threads
- Garmin Mar 2024
- From Garmin connect to Fetch... Nov 2023
- Garmin 405 Jul 2023
- Garmin Upload broken or just me? Jun 2023
- Garmin advice Sep 2022
- Garmin link to fetch issues? Nov 2021
- Garmin connect & Fetch May 2021
- Back to Garmins... Mar 2021
- Garmin forerunner 10 Mar 2021
- Garmin 735xt problem Jan 2021